Depth image based rendering (DIBR) is a popular technique for rendering virtual 3D views in stereoscopic and autostereoscopic displays. The quality of DIBR-synthesized images may decrease due to various factors, e.g., imprecise depth maps, poor rendering techniques, inaccurate camera parameters. The quality of synthesized images is important as it directly affects the overall user experience. Therefore, the need arises for designing algorithms to estimate the quality of the DIBR-synthesized images. The existing 2D image quality assessment metrics are found to be insufficient for 3D view quality estimation because the 3D views not only contain color information but also make use of disparity to achieve the real depth sensation. In this paper, we present a new algorithm for evaluating the quality of DIBR generated images in the absence of the original references. The human visual system is sensitive to structural information; any deg radation in structure or edges affects the visual quality of the image and is easily noticeable for humans. In the proposed metric, we estimate the quality of the synthesized view by capturing the structural and textural distortion in the warped view. The structural and textural information from the input and the synthesized images is estimated and used to calculate the image quality. The performance of the proposed quality metric is evaluated on the IRCCyN IVC DIBR images dataset. Experimental evaluations show that the proposed metric outperforms the existing 2D and 3D image quality metrics by achieving a high correlation with the subjective ratings.
International Journal of Control, Automation and Systems - The surface temperature of workpieces in a multi-temperature zone sintering furnace is an important parameter to characterize the... 相似文献
Neural networks (NNs) are extensively used in modelling, optimization, and control of nonlinear plants. NN-based inverse type point prediction models are commonly used for nonlinear process control. However, prediction errors (root mean square error (RMSE), mean absolute percentage error (MAPE) etc.) significantly increase in the presence of disturbances and uncertainties. In contrast to point forecast, prediction interval (PI)-based forecast bears extra information such as the prediction accuracy. The PI provides tighter upper and lower bounds with considering uncertainties due to the model mismatch and time dependent or time independent noises for a given confidence level. The use of PIs in the NN controller (NNC) as additional inputs can improve the controller performance. In the present work, the PIs are utilized in control applications, in particular PIs are integrated in the NN internal model-based control framework. A PI-based model that developed using lower upper bound estimation method (LUBE) is used as an online estimator of PIs for the proposed PI-based controller (PIC). PIs along with other inputs for a traditional NN are used to train the PIC to predict the control signal. The proposed controller is tested for two case studies. These include, a chemical reactor, which is a continuous stirred tank reactor (case 1) and a numerical nonlinear plant model (case 2). Simulation results reveal that the tracking performance of the proposed controller is superior to the traditional NNC in terms of setpoint tracking and disturbance rejections. More precisely, 36% and 15% improvements can be achieved using the proposed PIC over the NNC in terms of IAE for case 1 and case 2, respectively for setpoint tracking with step changes.
The friction in tribo-systems that contain viscoelastic materials, such as elastomers, is relevant for a large number of applications. Examples include tyres, hoses, transmission and conveyor belts. To quantify the friction in these applications, one must first understand the contact behaviour of such viscoelastic materials, both in static and in dynamic situations. This work discusses an experimental study into the change of the contact area with the sliding velocity and relates the change in contact area with the mechanical properties of the elastomer. The results show that for a tribo-system containing an elastomer, there is a threshold velocity, above which the size of the contact area significantly reduces. 相似文献
Electrical capacitance volume tomography (ECVT) is a recently-developed technique for real-time, non-invasive 3D monitoring of processes involving materials with strong contrasts in dielectric permittivity. This work is first application of the method to visualization of water flow in soil. We describe the principles behind the method, and then demonstrate its use with a simple laboratory infiltration experiment. 32 ECVT sensors were installed on the sides of an empty PVC column. Water was poured into the column at a constant rate, and ECVT data were collected every second. The column was then packed with dry sand and again supplied with water at a constant rate with data collected every second. Data were analyzed to give bulk average water contents, which proved consistent with the water supply rates. Data were also analyzed to give 3D images (216 voxels) allowing visualization of the water distribution during the experiments. Result of this work shows that water infiltration into the soil, wall flow, progress of the unstable wetting front and the final water distribution are clearly visible. 相似文献
The trivalent rare-earth (RE3+) doped phosphors show tremendous achievement in narrow band multicolor line emission for various applications. However, the 4f–4f absorption transition of these ions is forbidden in UV and blue light excitation. Usually, a sensitizer having spin allowed transition was used as a co-dopant to excite these ions via the energy transfer phenomenon. Another approach promisingly using to excite these ions by efficient energy transfer from the intrinsic emission of the Ca2LuTaO6 double perovskite phosphors host lattice. Phosphors of Ca2LuTaO6 with double perovskite structure were synthesized by using a high-temperature solid-state reaction method. The produced Ca2LuTaO6 double perovskite phosphors show an intrinsic broad band emission centered at 424 nm under the excitation of 313 nm UV light. The origin of this broad band blue emission was deeply investigated by using computation and experimental approaches. The trivalent activator Dy3+ and Eu3+ were doped is a single and co-dopant in the produced Ca2LuTaO6 phosphors to check their excitation in UV and near-UV spectral region. X-ray diffraction and scanning electron microscopy were used to investigate the structure and phase analysis. Various characterizations such as photoluminescence excitation, emission, and CIE chromaticity coordinates were measured which illustrate the potential of Dy3+ and Eu3+ activated Ca2LuTaO6 double perovskite phosphors for narrow band multicolor line emission for various applications. 相似文献
This study reports the effect of polydopamine bionic coating and γ-methacryloxypropyltrimethoxysilane (KH570) composite modified polyacrylonitrile (PAN) fiber as a secondary modifier on the performance of styrene-butadiene-styrene (SBS) modified asphalt. Dynamic shear rheometer test indicated the complex shear modulu, storage modulus, and loss modulus of modified PAN (KD-PAN) incorporated SBS modified asphalt was increased by 12.4, 20.5, and 11.2%, respectively compared with PAN/SBS modified asphalt. The master curve of G* of fiber/SBS composite modified asphalt shows that the deformation resistance of KD-PAN/SBS modified asphalt is greater than that of PAN/SBS modified asphalt in the entire loading frequency range. The cone penetration test showed significantly enhanced shear strength of KD-PAN/SBS modified asphalt. The adhesion work test results and SEM images of interface between fiber and SBS modified asphalt revealed that the adhesion effect of KD-PAN and SBS modified asphalt is better than that of PAN and SBS modified asphalt. SEM and AFM images of fiber further showed that the fiber surface becomes rough after modification. The increased surface roughness of KD-PAN facilitated the adherence of SBS modified asphalt to it, which in turn led to the enhanced performance of KD-PAN/SBS composite modified asphalt at the same fiber content and temperature. 相似文献
This research aims to study the effect of ammonium polyphosphate and expandable graphite on the intumescent coating formulations (ICF). The coating presented in this research article is based on carbon source expandable graphite (EG), blowing agent melamine, acid source ammonium polyphosphate (APP), epoxy resin as a binder with polyamide amine. The stability of the developed coating was verified at 950°C for 1-hour fire test. The results showed that the coating is stable and well bond with the steel substrate. The char was characterized by using FESEM, XRD, FTIR, DTA, TGA, XPS, Py-GCMS and Weathering Test. The morphology of the char was studied by SEM of the coating after furnace fire test. XRD and FTIR show the presence of graphite, borophosphate; boron oxide and sassolite in the residual char. TGA and DTG disclosed that EG improved the residual mass of coating. XPS analysis showed the char residue of IF5-APP-EG contains carbon and oxygen contents 47.50 and 40.70, respectively. Py-GCMS analysis described that the IF5-APP-EG released less gaseous compounds. The weathering test illustrated that's the char expansion of coatings samples was decreased due to the presence of a humid environment and UV light. The IF5-APP-EG showed the maximum char expansion, lower substrate temperature and high residual weight among the studied formulations. 相似文献